Anyone who has ever been in a meeting discussing a Marketing Mix Model (MMM) will have heard the word “adstock”. It’s one of those terms analysts use often, and it can sound more mysterious than it is.

The concept is simple – adstock is a device we use in MMM to represent how the impact of advertising dissipates over time. The further the consumer gets in time from the message (or impact), the less the effect is estimated to be.

It’s called adstock because we like to think that advertising is building a “stock” of impact, and then that stock decays. It’s a useful model because, in practice, the response to advertising usually does follow a decaying pattern like this.

When an analyst builds an MMM, they will most likely use the adstock model to estimate the impact of advertising over time. Geometric adstock is itself a simple distributed lag. More flexible lag shapes are available – polynomial distributed lags (PDLs), or the Weibull and delayed adstock forms used in Robyn and Meridian – and they can capture effects that build before they fade, but they have more parameters and need more data to fit well.

To estimate the adstock series, the analyst will take your data – typically weekly TV impacts, gross rating points (GRPs) or spend – and apply an adstock (carryover) rate to the series, a rate that should itself be estimated from that data: each week keeps that share of the previous week’s stock and adds the new activity. With a weekly rate r, the half-life is roughly ln(0.5)/ln(r) weeks – a 50% rate halves in one week, a rate of about 84% in four. The theory is that some media will have a longer impact on our memory structures than other ads, simply because sometimes we pay more attention. Think an epic ad in the cinema versus that ad you just scrolled past in your feed. Memorable ads will tend to have higher adstock rates, whilst “wallpaper” ads are quickly forgotten and carry little or no adstock. These rates translate into business impact – the effect carries over for longer when adstock rates are higher.

Half-life is the easier way to think about all of this, and more of the industry is now reporting it alongside, or instead of, the carryover rate. Few people have an intuitive feel for a carryover of 84%. “Half the effect has gone after four weeks” needs no explanation, and it is something you can sense-check against what you know about your own advertising.

Half-life also shows how uneven the scale is. Moving from 50% to 84% takes the half-life from one week to four. The next eight points, to about 92%, double it again to eight weeks, and above that it climbs very quickly. Two rates that look close on paper can describe very different advertising.

Half-life against carryover

Weeks for half the effect to fade, at each weekly adstock rate. Each doubling of the half-life needs a smaller step in the rate.
0 2 4 6 8 10 12 14 0%20%40%60%80%100% Half-life, weeks Adstock (carryover) rate, per week 1 week · 50% 2 weeks · 71% 4 weeks · 84% 8 weeks · 92%

Easier to feel than to describe. Drop a weekly spend pattern in below, then nudge the rate up and down to see how the curve responds.

Try it

Weekly media spend (bars) and resulting adstock (curve)
W1W2W3W4W5W6W7W8 Media spend Adstock

A few things worth noticing as you play with it. A short heavy burst with a high adstock rate keeps working for weeks after the spend stops. The same burst at a low adstock rate is mostly gone by the following week. And a small top-up in a later week behaves very differently against an empty tail than against a still-warm one – this is the bit MMM is meant to capture, and the bit that makes getting the adstock rate right matter when the model is read.

That is why the adstock rate should never simply be the analyst’s choice. It should be derived empirically from your data: test a range of rates against your actual sales and let the fit decide, or estimate the rate within the model itself. A rate taken from a default setting, a rule of thumb or last year’s model builds an assumption into every number that follows, and the same campaign can look much more or much less effective depending on it.

Done properly, the rate is valuable in its own right. It tells you how long your advertising actually keeps working, which is evidence you can plan with: it bears directly on whether a burst, a pulse or something in between suits your next laydown. So when an MMM report lands on your desk, ask what adstock rate was found for each channel, expressed as a half-life, and how the data showed it. A good analyst will show you the evidence. “It’s what we always use” is a choice, not a finding.

If you’d like to talk through what adstock rates are doing in your own model, drop a line to [email protected].